There are very less instructions available to use satfinder or signal meter so we give you a detail instruction for your ease. Signal meter are also names as satfinder or satellite finder these are devices used to locate the satellite in space. Prices of this device has decreased rapidly at a great extent within few passing years reason behind this fact is increasing usage of this device as no one can manage without this ins satellite world. But there are very short instructions are available to how to use these devices that fact is very disturbing for users. Just for interest I observed at once and the other day and it still works for aiming the dish antenna until the signal mounts and bingo there was picture but to use you have sufficient knowledge about everything. Most of vendors or manufacturers don’t provide sufficient instructions to their customers so I thought I should do this work for users.
Astra 28 is first thing that you should recognize there are many systems up their other than the satellite system of UK so ordinary satfinder are unable to judge differences between these signals. Signals of Astra 19 and Hot bird are stronger than Astra 18 so if until you get stronger signals you simply turning dish there are chances that your dish is not pointing towards right direction.
Some times satellite finder meter reacts strange toward a direction signals coming from through trees. So if trees are on the ways picture will not be clear so you must deal this obstacle and clear the way and point the dish towards this direction later.
This is how to use the satfinder:
there are two screw sockets on this meter so use a cable to connect the one side with dish and other side with digital box or receiver. There will be symbols on each socket for indication. So don’t use the meter wrong way to save any kind of harm to meter. I think harm is not cause by wrong way but it will just won’t work in wrong way. Now switch the power on so meter will be connected to dish through LNB if you have audible voice options on meter turn it on. There will be a steady tune you will hear. After that witch on your TV set and open signals test screen. Options are different on different TV provider’s apparatuses.
Now you have to set the direction of dish rim most times direction is roughly vertical that is ok for British isles but if you are living in south you have to rise the rim direction further but don’t rise it madly as some dishes work below the way and you have not need to directly aim it on satellite. Than point the dish face toward east direction and move it in slow speed towards south and whole time check the tone of satellite finder if pitch began to rise you are going fine. Check the meter’s sensitivity level and turn it high if you don’t hear anything. So turn the dish until you get the as high pitch as you can get. Otherwise you should check the other elevations and directions.
Satfinder TV display:
When pitch rise than check the TV screen if it is showing 0002 and 07d4 than it is skybox signals or if you are checking 003b and 0802 than it is Free Sat box other numbers will be other satellite signal it will not be Astra28.
Just often I stumble upon a gizmo or a plan that creates ME go Wow! One is that the inclinometer shown in here. Throughout the summer of 2010 I received Associate in Nursing email from a Brian Walters. Like several people, he conjointly had struggled with a traditional signal meter and was wanting around for one thing higher. He found this gizmo, a 3.5" show LCD digital display alphanumeric display} display satellite finder and acquired one straight off. There is conjointly this one that is incredibly similar in its purposeful characteristics however is hand-held and so could be easier to use. So you can find satfinder of your choice anywhere for your ease.
Tags : Satfinder, sat finder, satellite finder, signal meter, features of signal meter, how to use signal meter, satellite finder tutorial
Post a Comment